ROOM TEMPERATURE CURE SILICONE RUBBER

One-component Protective Silicone Coating

Product Properties

Neutral non-corrosive single-component liquid silicone
– Highly flowable, ideal for applications that require the coating to flow into small crevices and hard-to-reach areas
– Can be used as horizontal joint sealant and crack filler
– When exposed to atmospheric moisture, this product will be cured to a rubber-like solid, which is mold and mildew resistant

Brand

NOVAGARD

Products

RTV200-102(White)
RTV200-107(Black)

Applications

Product Properties

Colors: black, translucent
– Neutral, mainly used for protective coatings against moisture with medium range viscosity and self-leveling properties
– Come with thixotropy, ideal choice for applications of preventing leakage during the cure cycle
– Strengthen the moisture-proof, anti-fouling and dust-proof capabilities of electronic products
– Prevent corrosion problems caused by contact of solder joints and conductors with air

Brand

NOVAGARD

Products

RTV200-202
RTV200-250

Applications

Product Properties

Translucent color, neutral and mainly used for protective coatings against moisture with excellent fluidity and self-leveling properties
– Contains a UV tracer to aid in monitoring coverage
– Can protect coatings of intricate electrical and mechanical devices
Suitable for insulating electrical terminals, and thin section potting applications that require the coating to flow into small crevices and hard to reach areas
– Can enhance moisture-proof, anti-fouling, and dust-proof capabilities of electronics devices
– Can prevent corrosion problems caused by contact between solder joints and conductors and air

Brand

NOVAGARD

Products

RTV200-251 (low viscosity)
RTV200-257 (medium viscosity)
RTV200-260 (ultra-low viscosity)

Applications

Product Properties

 – Neutral and mainly used for electrical and mechanical coating devices to protect against moisture with excellent high temperature resistance
– Can maintain physical properties even when exposed to temperatures as high as 246°C (475°F) for brief periods
– Self-leveling silicone liquid, suitable for applications that require the coating to flow into hard-to-reach areas
– Can enhance moisture-proof, anti-fouling, and dust-proof capabilities of electronics devices
– Can prevent corrosion problems caused by contact between solder joints and conductors and air

Brand

NOVAGARD

Products

RTV200-306 (Red)
RTV200-465 (Gray)

Applications

One-component Adhesive Sealant

Product Properties

 – Non-corrosive single-component MS polymer hybrid sealants/adhesives
Tack-free in 15-45 minutes, can be painted or top coated in 1 hour
Stays flexible and is resistant to shrinking and cracking after cured
 – No solvents (VOC compliant), it is flexible and will not shrink, sag or slump after curing
 – Excellent resistance to weather, UV, mold and mildew, and dirt pickup
 – Great and safe for uses indoor with no odor
 – Bond to a variety of substrates without the use of a primer, such as glass, aluminum, wood, and PVC
 – ASTM G154 compliant (2000 hours UV-A)

Brand

NOVAGARD

Products

RTV900-300
RTV900-310
RTV900-500
RTV900-502
RTV900-70X
RTV900-91X
RTV900-92X

Applications

One-component Adhesive Sealant (Low adhesion)

Product Properties

– Present in paste-like white and translucent colors choices
– Low adhesion silicone sealant
Can be cured to a solid rubber-like normal silicone RTV
Ideal for creating formed-in-place gaskets where re-entry or post production disassembly is necessary

Brand

NOVAGARD

Products

RTV 400-900
RTV 400-950

Applications

One-part Adhesive Sealant (Fast Tack-free)

Product Properties

– Present in paste-like black and translucent colors choices
– Neutral cure (oxime cure) silicone will outgas a small amount of ammonia and alcohol during cure, and tack-free in 15 minutes
It can be quickly dried and adhered to various materials such as aluminum, steel, etc. without using a primer
Can be used for caulking and bonding according to the requirements of high productivity
High weather resistance, ozone resistance, and electrical insulation properties

Brand

MOMENTIVE 

Products

TSE382
TSE3826

Applications

Product Properties

 – Present in paste-like black and translucent colors choices
 – Neutral cure (oxime cure) silicone will outgas a small amount of ammonia and alcohol during cure, and tack-free in 15 minutes
 – It can be quickly dried and adhered to various materials such as aluminum, steel, etc. without using a primer
 – Can be used for caulking and bonding according to the requirements of high productivity
 – High weather resistance, ozone resistance, and electrical insulation properties
 – UL File No.36952 and MIL-A-46106B compliant

Brand

MOMENTIVE 

Products

RTV 5813
RTV 5818

Applications

Product Properties

 – Present in paste-like gray, translucent, and black colors choices 
 – Fast tack-free silicone sealant
 – Can provide fast surface drying time and high initial tack strength
 – Can quickly locate and provide the advantages of early strength combination to hold the assembly together as the unit moves from station to station
 – 4-7 minute skin over times and tensile strength is 150-200 psi after fully cured

Brand

NOVAGARD 

Products

RTV 400-118
RTV 400-195
RTV 400-196
RTV 400-202

Applications

Product Properties

 – Present in paste-like black and translucent colors choices
 – Non-corrosive silicone RTV adhesive, and release some alcohol vapors during cure
 – Alkoxy cure series which are suitable for electronic components, circuit boards, and other sensitive components
 – Good adhesion to many substrates including aluminum, polycarbonate, glass, steel
 – Excellent dielectric properties, solvent-free, no corrosive by-products
 – Fast tack-free property

Brand

NOVAGARD 

Products

RTV500-102
RTV500-150

Applications

One-part Adhesive Sealant (General Purposes)

Product Properties

 – Present in paste-like white, black, translucent, and aluminum colors choices
 – Release acetic acid during cure (acetoxy cure)
 – Can be used for vertical and overhead surface sealant and bonding
 – Offer many advantages such as electrical insulation, moisture resistance, dust, and shock, covering, parts protection, and gaskets
 – FDA 21 CFR 177.2600, USDA, NSF International Std. No. 51, MIL-A-46106, and UL File No.36952 compliant

Brand

MOMENTIVE

Products

RTV102
RTV103
RTV108
RTV109

Applications

Product Properties

 – White and black colors choices, good fluidity RTV silicone adhesive sealant
 – Release acetic acid during cure (acetoxy cure)
 – Can be used for vertical and overhead surface sealant and bonding
 – Offer many advantages such as electrical insulation, moisture resistance, dust, and shock, covering, parts protection, and gaskets
 – FDA 21 CFR 177.2600, USDA, NSF International Std. No. 51, MIL-A-46106, and UL File No.36952 compliant

Brand

MOMENTIVE

Products

RTV112
RTV118

Applications

Product Properties

 – Translucent flowable adhesive silicone elastomer
– Release acetic acid during cure

 – Good temperature resistance and sealing performance, good adhesion properties to many substrates
 – Good insulation, radiation resistance, and chemical stability
 – Can be applied in electronics, rubber, medical, and food processing, etc.
 – E41 has toluene acts as solvent, provides good fluidity
 – E43 complies with US FDA food-grade standard – FDA21 CFR 177.2600

Brand

WACKER

Products

E41
E43

Applications

Product Properties

 – General purpose paste-like deacidification cure silicone sealants and adhesives
 – The RTV 100 series products react with moisture to form rubber-like solids. These products liberate acetic acid upon curing
 – FDA compliant and ANSI/NSF 51 certified
 – Good adhesion to many substrates including glass, metal, plastics, and ceramic

Brand

NOVAGARD

Products

RTV 100-101 (White)
RTV 100-102 (Black)
RTV 100-103 (Aluminum)
RTV 100-150 (Translucent)

Applications

Product Properties

 – Present in paste-like white, black, aluminum, and translucent colors choices
 – General purpose neutral cure silicone sealant adhesive paste
 – Deoxime cure and non-corrosive properties
 – Offer an excellent balance among rate of cure, adhesion and physical properties
 – Lower odor, bond to most common substrates without the use of a primer
 – Substitute for mechanical fasteners, formed-in-place gaskets, sealing refrigerator & freezer liners, adhering plastic moldings, waterproofing electrical components, sealing coaxial connectors, protecting instrumentation assembly

Brand

NOVAGARD

Products

RTV 400-100
RTV 400-102
RTV 400-103
RTV 400-150

Applications

Product Properties

 – Present in paste-like white, black, gray and translucent colors choices
 – High performance silicone sealant applied in Automotive and Industrial arenas
 – Offer excellent adhesion to numerous substrates including metals and plastics
 – Offer outstanding resistance to lubricating oil, brake fluid, anti-freeze and most wheel cleaners
 – Retain its physical properties even during service in extreme environmental conditions
 – Ideal for applications that require superior bond strength and moisture resistance
 – Listings / Specifications: GM 9985557 Type I Type II ; Chrysler MSCD135

Brand

NOVAGARD

Products

RTV 400-110
RTV 400-116
RTV 400-118
RTV 400-155
RTV 400-191
RTV 400-195
RTV 400-202
RTV 400-590

Applications

One-part Adhesive Sealant (Solvent Resistant Fluorosilicone)

Product Properties

 – Present in paste-like red RTV silicone adhesive sealant, release acetic acid during cure (acetoxy cure)
 – Fluorosilicone sealant mostly applied in fuselage, aircraft cabin, and home appliances
 – Resistance to swelling caused by hydrocarbon solvents, dimethyl silicone fluids and fuels
 – Adhesion to many substrates without using a primer
 – Fluid resistant, allowing its use with products regularly exposed to fuel, solvent and chemical environments
 – Retention of elastomeric property at temperatures of -60 °C to 204 °C for long periods, and up to 260 °C for short periods
 – Excellent weatherability and ozone resistance, and electrical insulation properties

Brand

MOMENTIVE

Products

FRV1106

Applications

One-part Adhesive Sealant (Heat Resistance)

Product Properties

 – RTV106 is silicone paste; RTV116 is self-leveling type with good fluidity.
Both are red color

 – Release acetic acid during cure (acetoxy cure), often used for covering and sealing high temperature parts
 – Heat-resistant and high-temperature applications, temperature resistance up to 260°C (500℉)
 – FDA 21 CFR 177.2600, USDA, NSF International Std. No. 51, MIL-A-46106, and UL File No.36952 compliant

Brand

MOMENTIVE

Products

RTV106
RTV116

Applications

One-part Adhesive Sealant (Electrical Insulation)

Product Properties

 – Black paste consistency RTV silicone adhesive sealant
 – Neutral, non-corrosive silicone RTV adhesive will release alcohol vapors from the sealant surface during cure
 – Can be applied to switches, motors, gaskets, high-voltage transformers, firewalls caulking or fireproof coatings
 – Offer excellent electrical insulation properties and flame retardancy
 – UL94 regulation, UL File No.36952, UL 94 V-0, and AMS 3374 compliant

Brand

MOMENTIVE

Products

RTV133
TSE3853-W
TSE3854DS

Applications

Product Properties

 – RTV160 is white flowable paste, RTV162 is white paste, and RTV167 is gray paste
 – Neutral non-corrosive RTV adhesive sealants will release some alcohol vapors during cure
 – Applied in capacitors, resistors and integrated circuits connections on printed circuit boards
 – Applied in insulation bonding of relays, bare copper wires, and connectors
 – Applied in sealing and bonding of tight surfaces, connectors, and micro circuits
 – Offer excellent electrical insulation properties and flame retardancy
 – UL File No.36952 and MIL-A-46106 compliant

Brand

MOMENTIVE

Products

RTV160
RTV162
RTV167

Applications

Product Properties

 – Non-corrosive paste-like silicone RTV adhesive
 – Release some alcohol vapors during cure
 – Alkoxy cure series which are suitable for electronic components, circuit boards and other sensitive components
 – Good adhesion to most of aluminum, polycarbonate, glass, steel
 – Excellent dielectric properties, solvent-free, no corrosive by-products
 – Maintain its physical properties even during service in extreme environmental conditions
 – Suitable for sealing the frame and junction box of solar photovoltaic modules, or bonding various plastics and holed substrates
 – RTV500-09X series products are ideal for applications that require superior bond strength and flame resistance
 – UL94V0 Rated File # E112126

Brand

NOVAGARD

Products

RTV500-100(白色)
RTV500-090(白色 UL 94V0)
RTV500-092(黑色 UL 94V0)

Applications

One-part Adhesive Sealant (Thixotropy)

Product Properties

 – Present in paste-like white, black, and translucent colors choices

 – Thixotropic paste will release acetic acid during cure (acetoxy cure)

 – Can be bonded to many metals and plastics, but it may discolor sensitive metals like copper and brass.
Do not use with polycarbonate (PC)

 – UL File No.36952 and MIL-A-46106 compliant

Brand

MOMENTIVE

Products

RTV122
RTV123
RTV128

Applications

One-part General Purposes RTV Series

Product Properties

 – Customized one-component adhesive, room temperature curing

 – Fluidity, hardness, and color can be adjusted according to actual demand

 – Good adhesion without using primer
 – Can be used for vertical and overhead surface sealant and bonding

 – Offer many advantages such as electrical insulation, resistance moisture, dust, and shock, covering, parts protection, and gaskets

Brand

HR Silicones

Products

GS-10XXX系列

Applications

One-part Condensation Cure RTV Series

Product Properties

 – Customized RTV silicone rubber, room temperature cure or heat cure

 – Fluidity, hardness, and color can be adjusted according to actual demand 

 – Good adhesion without using primer

 – Can be used for vertical and high place joint sealant and bonding

 – Offer many advantages such as electrical insulation, resistance moisture, dust, and shock, covering, parts protection, and gaskets

Brand

HR Silicones

Products

HR-RTAXXXX系列

Applications

Two-component Protective Silicone Coating

Product Properties

 – Two-component room temperature cure coating material with 50% solid content

 – This product can be applied on silicone surface by spraying or brushing to reduce surface viscosity of silicone cloth coating and reduce the film-forming time by heating
 – Cure when exposure to a temperatures of 20~25°C with a humidity of 50~70%RH after 24 hours

Brand

MOMENTIVE

Products

ME35

Applications

Menu